Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Alarm function
This function makes it possible to get immediate help/contact with those
people/numbers that are stored on the buttons , M1-M2.
Alarm message
The alarm message is a voice message that is heard automatically when the
alarm is activated. The pre-recorded message says:
-"This is an emergency call. To accept this call press zero."
Recording your own emergency message
1. Press
.
w
2. Scroll to RECORD MESSAGE with
tone is heard. Say the desired alarm message and then release OK. Speak
clearly and about 15-20 cm from the machine.
3. The recorded alarm message will be played back now. End with
If you want to change the message repeat steps 1-3.
The message should include your name, address and how to activate the
handsfree function. The message can be up to 20 seconds long.
Example of an outgoing message:
-This is an emergency call from John Smith from 10, Long Street, Middleton. I
require your immediate assistance. Press zero to connect this call.
To check the emergency message
1. Press
.
w
2. Scroll to CHECK MESSAGE with
3. The recorded alarm message will be played back now. End with
To delete own message and return to pre-recorded alarm message
1. Press
.
w
2. Scroll to CHECK MESSAGE with
3. When the recorded alarm message is played, press
/ .
b
English
/
. Press down OK until a
v
V
/
. Press OK.
v
V
/
. Press OK.
v
V
/ .
b
/ .
b
to delete. End with
C
Publicité
Table des Matières
