Volume Control; Hands Free Function - Doro PhoneEasy Display 312C Mode D'emploi

All manuals and user guides at all-guides.com
Redial function
If the number dialled is engaged or you wish to redial the last number
called simply lift the handset (or press

Volume control

The handset earpiece volume may be adjusted during a call using
To adjust the speaker volume (hands free), use
the telephone.
Timer
Immediately after dialling a telephone number a call timer will be shown
on the display. The timer is a simple way to help you keep track of how
long the call lasts.

Hands free function

1. Press
. The speaker will be activated and the Hands free indicator
s
light will illuminate.
2. Dial the required telephone number. The speaker volume can be
adjusted using
3. Speak towards the microphone located on the front edge of the
telephone.
4. Press
to terminate the call.
s
Please note!
During a conversation, you can switch from the hands free to handset mode at any time
by picking up the handset. Replace the handset to terminate the call.
Please remember that in hands free speaker mode it is only possible for one person at
a time to talk. The switch over between speaker and microphone is automatic and
dependent on the sound level of the incoming call and the microphone respectively. It is
therefore essential that there are no loud noises, e.g. music, in the immediate vicinity of
the telephone, as this will disrupt the speaker function.
English
s
located on the side of the telephone.

) and press .
r
located on the side of
/ .
q