Installing The Basic Wall Mount; Installing The Plug Holder - Porsche Mobile Charger Connect Mode D'emploi

Installing the Basic Wall
Mount
Fig. 1: Drilling dimensions
1. Mark the drill holes on the wall.
2. Drill the mounting holes and insert wall plugs.
3. Press the basic wall mount 2 into the cable
guide 1 from the front.
4. Screw the basic wall mount to the wall.

Installing the Plug Holder

Fig. 2: Distance from wall mount to plug holder
When installing the plug holder, ensure a distance
of 7.9 in. (200 mm) from the basic wall mount.

Installing the Basic Wall Mount

Fig. 3: Drilling dimensions
1. Remove plug holder 1 from the cover 2.
2. Mark the drill holes on the wall.
3. Drill the mounting holes and insert wall plugs.
4. Screw the plug holder 1 to the wall.
5. Fit the cover 2 onto the plug holder 1 from below
and press it upwards.
US
FC
ESM
PTB
TR
RU
UK
VIE
HE
AR
JPN
KOR
CHS
CHT
THA
5