Change Pressure Level - Medela Invia Liberty Mode D'emploi

Administrative mode

Change pressure level

20
3. Press the Selection buttons [
4. Press "OK"
1. To enter the Administrative mode, unlock the display,
press and hold [
➡
CAUTIONS
Set the pressure level and therapy mode according to prescribing
healthcare professional instruction.
Default pressure mode is Standard with preset pressure levels:
mmHg -40
(kPa) -5
1. To enter the Administrative mode, unlock the display,
press and hold [
2. Press the Selection buttons [
3. Press
"OK"
4. To return to the main display, press
CAUTIONS
If the pressure level is not confirmed, the pump will switch back
to previous settings and return automatically to the main display
after 5 seconds.
] or [
[ ] to confirm and enter the main display.
], and then press [
-60 -80 -100
-8 -11 -13
], and then press [
] or [
[ ] to confirm.
] to set pressure level.
].
-125 -150 -175
-17 -20 -23
].
] to set pressure level.
"Back" [ ].
-200
-27