Sun StorEdge 6320 Service Processor
WARNING: This is a restricted access server. If you do not have
explicit permission to access this server, please disconnect
immediately. Unauthorized access to this system is an actionable
offense and will be prosecuted to the fullest extent of the law.
new_sp console login: setup
Password: !setup
Last login: Tue May 20 13:50:09 on console
May 20 13:57:32 new_sp login: ROOT LOGIN /dev/console
Tue May 20 13:57:33 GMT 2003
***********************************************
* StorEdge 6320 Initial Configuration Utility *
***********************************************
Select the operation you wish to perform:
1. Initial configuration
2. Restore previously defined configuration
3. Unconfigure
4. Enable SW support for Lights Out Operation
Your Choice: 1
********************************************
* Initializing StorEdge 6320 Configuration *
********************************************
Initial configuration is setting up the id
and network parameters for your StorEdge 6320.
The current hostname for this StorEdge 6320 system is new_sp.
Searching for other existing StorEdge 6320 systems on your network...
Searching for a StorEdge 6320 with hostname sp0 ...
Searching for a StorEdge 6320 with hostname sp1 ...
Searching for a StorEdge 6320 with hostname sp2 ...
Searching for a StorEdge 6320 with hostname sp3 ...
Searching for a StorEdge 6320 with hostname sp4 ...
Searching for a StorEdge 6320 with hostname sp5 ...
Searching for a StorEdge 6320 with hostname sp6 ...
Searching for a StorEdge 6320 with hostname sp7 ...
No other StorEdge 6320 systems are currently configured on your
network.
Remarque – Si plusieurs systèmes Sun StorEdge 6320 sont connectés ensemble
pour que Sun StorEdge Remote Response puisse en effectuer la gestion simultanée
par l'intermédiaire d'une ligne téléphonique commune, vous devez attribuer un ID
de processeur de service de stockage compris entre 0 et 7.
4-2
Guide d'installation du système Sun StorEdge 6320, version 1.2 • janvier 2004