Télécharger Imprimer la page

Güde GSE 2501 Mode D'emploi page 19

Masquer les pouces Voir aussi pour GSE 2501:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
Air Filter
The air filter should be cleaned every 50 hrs of operation
Loosen 2 hexagon-head screw s.
Remove the cover.
Remove the air filter.
Clean the filter w ith spirit or ethanol
Drop a small amount of oil on the air filter and compress it.
Put the filtration cartridge back and put the housing on.
Fuel Filter
Remove the lid from the filler.
Pull the fuel filer from the filler
Clean the filter w ith spirit or ethanol
Dry it w ith a soft cloth.
Put the filter back in the filler.
Replace the lid on the filler.
Ignition Plug
Remove the ignition cable from the ignition plug (14) .
Remove the plug using a plug w rench.
Clean the electrode w ith a w ire brush.
Check the electrodes distance (0,7 - 0,8 mm correctly ) and adjust if necessary
Put the place back in the place.
Oil Replacem ent
Let the engine heat up.
Unscrew the filler plug.
Remove the discharge screw and drain the used oil onto a suitable container. .
Check packing and replace it if necessary. Screw the discharge screw in a pour new oil in. (For the kind of oil see
Chapter 4).
Screw the filler neck on.
Noise Silence Check
Let the noise silencer cool dow n.
The silencer could be clogged w ith parts of the filter.
Unscrew the lid and remove the cover.
Clean the surface w ith a w ire brush.
Replace if necessary.
Inspections and Maintenance Safety Instructions
The unit w ill serve as a sufficient aid only if maintained and cared for appropriately. Insufficient maintenance and care may result in
accidents and injuries.
19
Fig. 10

Publicité

loading

Ce manuel est également adapté pour:

Gse 2700Gse 4700Gse 1200 4t