Boston Scientific NM-7164 Guide D'installation page 4

Installer for Bionic Navigator 3D 2.20 (Win 10) - Installation Guide
Software Installation on CP
Verify that you have received the 9028372-225 Installer by following the steps below:
1. Plug the CP into a power source.
Note: The CP must be plugged in and charged to at least 30% in order to perform software
installation steps below.
2. Turn on the CP. If the CP is already on, restart the CP prior to installation.
3. Navigate to the CP desktop and ensure that all applications are closed.
4. From the CP desktop, launch AirWave .
5. Insert the Installer USB into an unused USB port.
6. Click "Import from USB" button in AirWave to launch the File Explorer window.
7. Within the file explorer window pop-up, navigate to the USB drive and then select the
installation file named "SC7101220W10.bsnpkg."
8. Open the installation file.
9. Click Yes on the popup notification to start the installation process.
10. Verify that the displayed Software Part Number is 9028372-225, as shown below:
Note: Obtaining an activation key is described in the following steps.
BSN employees: continue to steps 11-16.
Non-BSN employees: Contact your local sales representative to obtain an activation key, then
continue to step 17.
Installer for Bionic Navigator 3D 2.20 - Installation Guide
92357492-02 2 of 49