Unpacking - Stuv 16/58-IN Installation, Mode D'emploi Et Maintenance

Masquer les pouces Voir aussi pour 16/58-IN:
Table des Matières

Publicité

3.2 Unpacking

Please note !
The paint is not oven baked and is therefore relatively
fragile but will harden after being heated a few times.
Handle the system with care when installing.
Checking the order
Where accessories have been ordered (frame, support,...),
they will be found around the hearth or its packaging.
Please check all accessories are supplied as ordered.
Inside the combustion chamber, you will find...
A) Paint spray for touch-up
B) Grips to handle the finishing cover
C) Flap
D) Tablet - N/A
E) Cold handgrip to handle the door and the valve
F) Anti-sweep stainless steel bar
G) 2 bolts for attaching the front of the freestanding
fireplace to the support plate
H) 2 screws for attaching the back of the
freestanding fireplace to the support plate
J) Installation instructions and directions for use
1
3.2 Déballage
Attention !
La peinture n'est pas cuite au four; elle est donc
relativement fragile mais elle durcira lors des premières
chauffes ; par conséquent, manipuler l'appareil avec
précaution lors de son installation.
Vérification de la commande
Si des accessoires ont été commandés (cadre,
support...), ils sont disposés autour du foyer ou de son
emballage. Contrôler la bonne réception de tous les
accessoires commandés.
Dans la chambre de combustion, vous trouverez...
A) Bombe de peinture pour retouches
B) Adaptateur pour cheminée
C) Abattant
D) Tablette - N/A
E) Poignée «main froide» pour manipuler la porte et le
registre
F) Barre en inox anti-ramoneur
G) vis pour fixation avant du foyer au plateau de prépose
H) 4 vis pour fixation arrière du foyer au plateau de prépose
J) Instructions d'installation et mode d'emploi
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

16/68-in16/78-in16-in

Table des Matières