Residual Heat Indication; Automatic Cooking - BORETTI M-system MKK-606 Notice D'emploi

Starting-up
• Start up / switch off the hob:
Action
To start
To stop
• Start-up/ switch off a heating zone :
Action
Increase power
Decrease power
Stop
If no action is made within 20 second the electronics returns in waiting position.

Residual heat indication

After swittching off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on, don't touch the heating zones and don't put any heat
sensitive object on them.
There are risks of burn and fire.

Automatic cooking

All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, then reduces automatically its power on the pre-selected level.
• Switching on the automatic cooking :
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
• Switching off the automatic cooking :
Action
Zone selection
Power level selection
Control panel
Press key [ 0/I ]
Press key [ 0/I ]
Control panel
Press key [ + ]
Press key [ - ]
Press simultaneous [ + ] and [ - ]
Control panel
Press key [ + ]
Press key [ + ]
Re-press key [ + ]
Press key [ - ]
Control panel
Press key [ + ]
Press key [ - ]
Display
[ 0 ]
nothing or [ H ]
Display
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
Display
[ 0 ]
Pass from [ 1 ] to [ 9 ]
[ 9 ] blinking with [ A ]
[ 9 ] pass to [ 8 ] [ 7 ]
[ 7 ] blinking with [ A ]
Display
[ 7 ] blinking with [ A ]
[ 0 ]
NL
FR
D
EN
43