Pan Detection; Residual Heat Indication - BORETTI BIKP-78 Notice D'emploi

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case
it is impossible to increase the power and the display shows [ U ]. This symbol disappears when
a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows [ U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking continues
with the power level set before.
After use, switch the heat element off : don't let the pan detection [ U ] active.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.
Booster function
The Booster function [ P ] and the Double Booster [
lected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high Booster.
Booster is foreseen for example to heat up rapidly big quantities of water, like nuddles.
• Start up / Stop the booster function:
Action
Zone selection
Start up the Booster
Stop the Booster
• Start up / Stop the double booster function:
Action
Selection of the zone
Start up Booster
Start up Double Booster
Stop the Double Booster
Stop Booster
Control panel
Press key [ 0 ] from the zone
Press key [ P ]
Slide on the "SLIDER"
Control panel
Press key [ 0 ]
Press key [ P ]
Re-press key [ P ]
Press key [ P ]
Slide on the "SLIDER"
] grants a boost of Booster to the se-
Display
[ 0 ] and control light on
[ P ]
[ 9 ] to [ 0 ]
Display
[ 0 ]
[ P ]
[ and P ]
[ P ]
[ 9 ] to [ 0 ]
D
EN
27