Starting-Up And Appliance Management; Before The First Use; Sensitive Touch; Starting-Up - BORETTI M-system MKK-775 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STARTING-UP AND APPLIANCE MANAGEMENT

Before the first use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.

Sensitive touch

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a "beep" sound.
In the case of a general use press only one key at the same time.

Starting-up

You must first switching on the hob, then the heating zone:
Start-up/ switch off the hob:
Action
To start
Touch the key
Start-up/ switch off a heating zone:
Action
Zone selection
Increase power
Decrease power
Stop
If no action is made within 20 second the electronics returns in waiting position.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.

Automatic cooking

All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, then reduces automatically its power on the pre-selected level.
Switching on the automatic cooking:
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
Switching off the automatic cooking:
Action
Zone selection
Power level selection
Control panel
Press key [ 0/I ]
Press key [ 0/I ]
Control panel
Press key [ + ]
Press key [ + ]
Press key [ - ]
Press key [ - ]
Control panel
Press key [ + ]
Press key [ + ]
Re-press key [ + ]
Press key [ - ]
Control panel
Press key [ + ]
Press key [ - ]
37
Display
[ 0 ]
Nothing or [ H ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
Display
[ 0 ]
Pass from [ 1 ] to [ 9 ]
[ 9 ] blinking with [ A ]
[ 9 ] pass to [ 8 ] [ 7 ]
[ 7 ] blinking with [ A ]
Display
[ 7 ] blinking with [ A ]
[ 0 ]

Publicité

Table des Matières
loading

Table des Matières