Publicité
3 Description and installation
See pictures chapter A Set-up, page 3.
On initial delivery check the delivery
package of the trolley for completeness
and that the parts are intact
1. 5 castors
2. star base
3. trolley pole
4. jar holder
5. handle
Activating /deactivating the brakes
4 Before use
Perform the following safety checks
– Examine the trolley for obvious damage or safety defects before use.
– Prior to any use examine all accessories and replace if necessary:
– suction jars, lids and liners for cracks, brittle and flawed spots
– tubing for cracks and brittle areas
– Make sure that connectors are firmly attached.
– As an system check, evacuate the complete system (including jars) at maximum vacuum
before actual use. So you will see if it is tight.
CAUTION
The trolley must remain in an upright position during use.
To activate, press
lever down.
Assembling steps
1. Attach castors to star base.
2. Attach pole. Screw thread is facing up.
3. Attach jar holder.
4. Secure jar holder with handle.
Description and installation / Before use
To deactivate, press
lever up.
| 11
Publicité
Chapitres
