Using The Computer - Sportplus SP-MSP-008-B Mode D'emploi

5 B. USING THE COMPUTER
Turning on/off
The computer turns on automatically, once you start exercising. When pausing or
finishing the training, the computer will turn off automatically after approx. 4 minutes.
All data recorded and displayed until that moment will be deleted.
Display readings
SCHRITTE: Display of all steps taken.
ZEIT: Display of covered training time in minutes and seconds.
KALORIEN: Used energy in calories (approximate value).
SCHRITTE/
MINUTE: Number of steps you could take within one minute at that speed.
SCAN: All displays are shown for a few seconds in sequence.
Function buttons
MODUS: If necessary, press the button repeatedly until the display shows
the desired reading. The arrow in the display indicates the readings
currently displayed.
RESET: Press this button during use in order to reset the display to zero.
Observe the following:
• The SCHRITTE reading (reading of all steps taken) in the upper part of the
display is shown continuously and cannot be deactivated or modified.
• Use the MODUS function button in order to select different readings in the lower
part of the display.
When pausing the training, the upper left corner of the display will show: STOP.
•
S
T
O
P
SCHRITTE
/MINUTE
SCAN
27
SCHRITTE
ZEIT
KALORIEN