USE
Pause function
The pause function can only be used when at least one zone is switched On.
The maximum break duration is 10 minutes. After 10 minutes at pause, the hob stops.
Touch within 10 minutes the pause key to start the cooking zone.
While the Pause function is active:
•
Any Timer (also Alarm timer) set before the pause will be stopped during the pause and
continue when you stop pause function.
Indications in the display
In display
Status
Power levels cooking zone; 1 = low level / 9 = high level
Automatic heat-up function selected
Stay warm function selected
Child lock function selected
Residual heat indicator; The hob has a residual heat indicator for each cooking
zone to show those which are still hot. Although the hob is switched off, the
indicator 'H' will remain On for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit. Danger! Risk of burns.
Fault code; See 'Troubleshooting table'
Fault code; See 'Troubleshooting table'
EN 10