Pause Function; Indications In The Display - Pelgrim IDK893ONY Notice D'utilisation

All manuals and user guides at all-guides.com
USE

Pause function

The execution of the function is only possible if at least one zone is on. The pause condition may
also be activated with cooking zone specific errors, here, the display of error codes is hidden.
Also residual heat indication, special display indications such as 'automatic heat up', 'power
boost' or 'no pan detection' are hidden; the display of the pause indications has priority. If there
is a general error during the pause, the control switches off and terminates the mode.
While the Pause function is active:
• Any Timer (also Alarm Timer) set before the pause will be stopped during the pause and
continue when pause mode is quitted.
• A selected booster or heat up time automatic function is terminated.
• Residual heat calculation and maximum operation time limitations will not be interrupted
and keep on working in the background.
• Functional indications such as Timer and bridge-zone, keep on glowing according to their status.

Indications in the display

In display
Status
Power setting cooking zone; 1 = low setting / 9 = high setting
Boost function active
Automatic heat-up function selected
Warming function selected
No (suitable) pan on cooking zone (pan detection symbol)
Child lock function selected
Bridge function selected
Residual heat indicator; The hob has a residual heat indicator for each cooking
zone to show those which are still hot. Although the hob is switched off, the
indicator 'H' will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit. Danger! Risk of burns.
Pause hob operations active.
Fault code; See 'Troubleshooting table'
Fault code; See 'Troubleshooting table'
EN 11