Before You Use Your Receiver
Before you use your receiver for the first time or when
you want to clear the receiver's memory, do the
procedure below:
?/1 (power)
DIMMER
1
Turn off the receiver.
2
Press ?/1 (power) for more than 4 seconds.
"INITIAL" appears in the display and the items
including the following are reset or cleared:
• All preset stations are reset to their factory
settings.
• All sound field parameters are reset to their
factory settings.
• All index names (of preset stations and
programme sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each programme
source and preset station is cleared.
Turn on the receiver and check the following indicator.
• Press MUTING if MUTING appears on the
display.
• Press DIMMER repeatedly to set the display at any
of four levels of brightness.
Storing FM Stations
Automatically in Alphabetical
Order ("Auto-betical")
With "Auto-betical select" you can automatically store
up to 30 FM and FM RDS stations in alphabetical order
without redundancy. Additionally, "Auto-betical
select" only stores the stations with the clearest signals.
If you want to store FM or AM (MW) stations one by
one, see "Presetting Radio Stations" on page 13.
FM RDS stations are stored first, in alphabetical order
by their Station Name, followed by regular FM stations
in order of frequency. (For more details on RDS, see
page 14.)
MUTING
1
2
To change a preset code to another station
See "Presetting Radio Stations" on page 13.
To stop Auto-betical before storing all the stations
Press ?/1 (power) to turn the receiver off.
Notes
• If you move to another area, repeat this procedure to store
stations in your new area.
• For details on tuning to the preset stations, see page 13.
• Once "FINISH" appears, all the previous preset memories
are cleared. Preset AM stations again if necessary.
Getting Started
Press ?/1 (power) to turn off the receiver.
Hold down MEMORY and press ?/1 (power) to
turn the receiver on.
"AUTOBETICAL SELECT" appears and the
receiver scans and stores all the FM and FM RDS
stations in the broadcast area.
"FINISH" appears when the receiver has finished
storing the FM and FM RDS stations.
Stations currently stored in the preset memory are
shifted to the rear (toward C0) and may be erased,
depending on the number of stations received by Auto-
betical select.
9
GB