Remote Button Descriptions - Sony STR-DE375 Mode D'emploi

Remote Button Descriptions

You can use the remote to operate the components in your system. The table below shows buttons not described on
previous pages and buttons with names different from buttons on the main unit.
Remote Button
AV
?/1
0-9
>10
ENTER
-/- -
./>
m/M
n
N
26 GB
Operates Function
TV/VCR/ Turns the audio and video
CD player/ components on or off.
DVD player/
MD deck/
VCD player/
LD player/
DAT deck
Receiver Use with "SHIFT" button
to select tuner preset
station numeric input
during DIRECT TUNING
or MEMORY mode.
CD player/ Selects track numbers.
MD deck/ 0 selects track 10.
VCD player/
LD player/
DAT deck
TV/VCR/SAT Selects channel numbers.
CD player/ Selects track numbers over
MD deck/ 10.
Tape deck/
VCD player/
LD player
TV/VCR/SAT/ After selecting a channel,
Tape deck/ disc or track using the
LD player/ numeric buttons, press to
VCD player/ enter the value.
MD deck/
DAT deck
TV Selects the channel entry
mode, either one or two
digit.
CD player/ Skips tracks.
MD deck/
DVD player/
LD player/
VCD player/
Tape deck/
VCR/
DAT deck
CD player/ Searches tracks (forward
DVD player/ or backward).
VCD player
MD deck/ Fastforwards or rewinds.
Tape deck/
VCR/
LD player/
DAT deck
Tape deck Starts play on the reverse
side.
CD player/ Starts play.
MD deck/Tape
deck/VCR/
DVD player/
VCD player/
LD player/
DAT deck
Remote Button Operates
X CD player/
MD deck/Tape
deck/VCR/
DVD player/
VCD player/
LD player/
DAT deck
x CD player/
MD deck/Tape
deck/VCR/
DVD player/
VCD player/
LD player/
DAT deck
POSITION* TV
SWAP* TV
DISC CD player
SUB CH +/–* TV
D. SKIP/CH/ Receiver
PRESET +/–
TV/VCR/SAT
CD player
P IN P* TV
JUMP TV
WIDE
TV
ANT TV/VTR
VCR
TV/VIDEO TV/VCR
* Only for Sony TVs with the picture-in-picture function.
Function
Pauses play or record.
(Also starts recording with
components in record
standby).
Stops play.
Changes the position of
the small picture.
Swaps the small and the
large picture.
Select discs (Mega
storage CD player only).
Select preset channels for
small picture.
Scans and selects preset
stations.
Selects preset channels.
Skips discs (CD player
with multi-disc changer
only).
Activates the picture-in-
picture function.
Toggles between the
previous and the current
channels.
Selects the wide-picture
mode.
Selects output signal
from the antenna terminal:
TV signal or VCR
programme.
Selects input signal: TV
input or video input.