Declaration Of Conformity; Safety Instructions - Dreve PCU LED Mode D'emploi

PCU LED

3. Declaration of conformity

According to Machinery Directive (2006 / 42 / EG), Low Voltage Directive (2014 / 35 / EU)
and EMV Directive (2014 / 30 / EU)
Herewith we declare that the machine described below in its conception and design and
in the shape delivered by us is in accordance with the fundamental requirements for
safety and health as prescribed in the applicable EC directives. In the case of any change
or modification of the machine, not authorised by us, this declaration becomes invalid.
Denomination of the machine: PCU LED / PCU LED N
4316 / 4317
Type of machine: Light polymerization unit
Applicable EC directives: 2006 / 42 / EC According to Machinery Directive
2014 / 35 / EC Low Voltage Directive
2014 / 30 / EC EMV Directive
Appllied harmonized standarts:
2006 / 42 / EC According to Machinery Directive
EN ISO 12100:2010 Safety of machinery – General principles for
+ Corrigendum to design – Risk assessment and risk reduction
DIN EN ISO 12100:2011-03 (ISO 12100:2010); German Version EN ISO
12100:2010 + Corrigendum to DIN EN ISO
12100:2011-03
2014 / 35 / EC Low Voltage Directive
EN 60204-1:2006 / A1:2009 Safety of machinery – Electrical equipment
+ Corrigendum to EN 60204-1:2006 of machines – Part 1: General requirements
(IEC 60204-1:2005 / A1:2008); German Version
EN 60204-1:2006 / A1:2009 + Corrigendum to
EN 60204-1:2006; German Version CENELEC-
Cor.:2010 to EN 60204-1:2006
EN 61010-1:2010 Safety requirements for electrical equipment
for measurement, control and laboratory use
– Part 1: General requirements (IEC 61010-
1:2010 + Cor.:2011); German version EN
61010-1:2010
2014 / 30 / EC EMV Directive
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) – Part 3-2:
Limits – Limits for harmonic current emissions
(equipment Input current <= 16 A per phase)
(IEC 61000-3-2:2014); German version EN
61000-3-2:2014
26 26
2
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) – Part
3-3: Limits – Limitation of voltage changes,
voltage fluctuations and flicker in public low-
voltage supply systems, for equipment with
rated current <=16 A per phase and not sub-
ject to conditional connection (IEC 61000-3-
3:2013); German version EN 61000-3-3:2013
EN 61326-1:2013 Electromagnetic compatibility (EMC) – Part
3-3: Limits – Limitation of voltage changes, vol-
tage fluctuations and flicker in public low-vol-
tage supply systems, for equipment with rated
current <=16 A per phase and not subject to
conditional connection (IEC 61000-3-3:2013);
German version EN 61000-3-3:2013
Dreve Company Group
Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-0
Fax: +49 2303 82909
E-Mail: info@dreve.de
www.dreve.com

4. Safety instructions

Attention! Please read these notes carefully before the connection and commissioning
of the device. The operational safety and functioning of the device can only be ensured if
both the general safety and accident prevention regulations as specified by the legislator
and the safety instructions in the operating instructions are observed.
1. The device must only be used in stable and loadable for the operating
accordance with the present operating weight of approximately 9.5 kg.
instructions. We do not assume any
liability for damages which result from 4. Do not insert any objects into the device
improper use and/or faulty operation. apart from the polymerization chamber.
2. Only operate the device at a socket 5. Only accessories and spare parts may
with a protective conductor. Never touch be used which are approved by the manu-
the plug with wet hands. facturer.
3. The device must be placed on a sta- 6. Do not lock the operating and safety
ble and level surface which is sufficiently elements of the device.
27 27