Declaration Of Conformity - Dreve Drufomat scan Mode D'emploi

3. Declaration of Conformity

According to Machinary Directive (2006/42/EG)
Herewith we declare that the machine described below is in its conception and design
and in the shape delivered by us in accordance with the fundamental requirement for
safety and health as prescribed in the applicable EC-guidelines. In the case of any change
or modification of the machine not authorised by us this declaration becomes invalid.
Designation of machine:
Type of machine:
Applicable EC-guidelines:
2006/42/EC
2006/95/EC
2004/108/EC
Applied harmonised standards:
2006/42/EG According to Machinary Directive
EN ISO 12100-1:2003 Safety of machinery; basic concepts, general principles for design -
Part1: Basic terminology, methodology (ISO 12100-1:2003 2009-12)
EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design -
Part 2: Technical principles and specifications (ISO 12100-2:2003
2009-12)
EN 13732-1:2008 Ergonomics of the thermal enviroment - Methods for the assess-
ment of human responese to contact with surfaces - Part 1: Hot
surfaces (ISO 13732-1:2006); German version EN ISO 13732-
1:2008-12
EN 60204-1:2006 Safety of machinery, electrical equipment of machines - Part 1:
General requirements (ISO 60204-1:2005 2006-06)
2006/95/EC Low Voltage Directive
EN 61010-1:2001 Safety requirements for electrical equipment for measurement,
control and laboratory use - part 1: general requirements (IEC
61010-1:2001)
2004/108/EC EMC Directive
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use
– EMC requirements; part 1: General requirements (IEC 61326-
1:2005); emission according to living area, ranch of commercial
and small enterprises; interference resistance according to indus-
trial area
Dreve Dentamid GmbH
Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-40 · Fax: +49 2303 8807-55
E-mail: info@dreve.de · www.dreve.com
Drufomat scan
D-3300 / D-330-1 / D-3300-2
Pressure thermoforming unit
Machinery Directive
Low Voltage Directive
EMC Directive
31 31