Declaration Of Conformity - Dreve FotoDent flash Mode D'emploi

Declaration of conformity

Low Voltage Directive (2006/95/EG).
Herewith we declare that the machine described below in its conception and design and
in the shape delivered by us is in accordance with the fundamental requirements for
safety and health as prescribed in the applicable EC directives.
In the case of any change or modification of the machine, not authorised by us, this decla-
ration becomes invalid.
Denomination of the machine:
Type of machine:
Applicable EC directives:
2006/95/EG
2004/108/EG
Applied harmonised standards:
2006/95/EG
EN 61010-1:2010
2004/108/EG
EN 61326-1:2013
Dreve Dentamid GmbH · Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-0 · Fax: +49 2303 8807-55 · dentamid@dreve.de · www.dreve.com/dentamid
FotoDent flash
®
DD35200/DD35201
Light polymerisation unit
Low Voltage Directive
EMC Directive
Low Voltage Directive
Safety requirements for electrical equipment
for measurement, control and laboratory use –
part 1: general requirements (IEC 61010-1:2010)
EMC Directive
Electrical equipment for measurement, control
and laboratory use – EMC requirements – Part 1:
General requirements (IEC 61326-1:2005);
German version EN 61326-1:2006
Emission according to living area, business and
industrial undertakings as well as small enterpri-
ses. Interference stability according to industrial
area.
47