Dreve PCU LED Mode D'emploi page 17

PCU LED
8.3. Operation: User level
32 32
Start screen after
switching on the device
Welcome screen
Firmware version
Selection of the
material parameters
If a parameter set is selected,
it will be highlighted on the
display. Additional confirma-
tion brings you to the selected
parameter-set in the status
window.
1
3
4 5
2
Status window
Additional confirmation starts
the exposure process.
1 – Programme name
2 – Return button
3 – Exposure time
4 – Pressure (mbar)
5 – Exposure icon (ON/OFF)
6 – Exposure atmosphere
(air/vacuum/nitrogen)
6
Ventilation of the
exposure room
Wait until the vacuum is
released so that e. g. the sealing
for the exposure chamber is not
destroyed!
Final process screen
After the exposure process, the
result is shown together with
the used parameter sets.
33 33