EyeVolution
®
1. Device description
EyeVolution
MAX is a light-polymeris-
®
ing unit based on LED for all tooth-
coloured composite materials that are
cured using light.
The integrated LEDs cover both the req-
uisite UVA and blue light ranges and
offer a very high penetration depth
of objects to be polymerised at an
extremely low thermal load.
2. Technical data
Dimensions (H x W x D):
Weight:
Mains voltage
Input:
Output:
Max. power consumption:
Polymerisation range:
Plate rotation speed:
Time programmes:
18
MAX
A reflective rotary plate guarantees
shadow-free polymerisation even of
larger objects at short polymerisation
times.
The highly energy-efficient 24 V appli-
ance can be operated using any kind of
socket and is perfectly suited to single
unit facilities due to its small dimen-
sions.
205 x 205 x 255 mm
1.6 kg
100–240 V / 50–60 Hz / 0.7 A
24V
max. 20 W
1 x 385–390 nm / 6 x 465–470 nm
6 x 180° / min
1 / 2 / 3 / 5 / 10 min
3. Declaration of Conformity
Herewith we declare that the machine described below in its conception and design and in the
shape delivered by us is in accordance with the fundamental requirements for safety and health
as prescribed in the applicable EC directives.
In the case of any change or modification of the machine, not authorised by us, this declaration
becomes invalid.
Machine designation:
EyeVolution
MAX
®
D-38101
Type of unit:
Light polymerization unit
Applicable EC Directives:
2004/108/EG
EMC Directive
Applied harmonised standards:
2004/108/EG
EMC Directive
EN 61000-3-2:2010-03
+ Corrigendum to
EN 61000-3-2:2011-06
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits
for harmonic current emissions (equipment input current
<= 16 A per phase) (IEC 61000-3-2:2005 + A1:2008 +
A2:2009); German version EN 61000-3-2:2006 + A1:2009 +
A2:2009.
EN 61000-3-3:2013
Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limita-
tion of voltage changes, voltage fluctuations and flicker in public
low-voltage supply systems, for equipment with rated current
<=16 A per phase and not subject to conditional connection
(IEC 61000-3-3:2013); German version EN 61000-3-3:2013.
EN 61326:1:2013
Electrical equipment for measurement, control and laboratory
use – EMC requirements – Part 1: General requirements (IEC
61326-1:2012); German version EN 61326-1:2013 Emission
according to living area, business and industrial undertakings
as well as small enterprises interference stability according to
industrial area.
Dreve Dentamid GmbH · Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-0 · Fax: +49 2303 8807-55 · dentamid@dreve.de · www.dreve.com/dentamid
19