Saving (Writing) A Program Or Combination - Korg microSTATION Guide De Démarrage

Easy Start Guide

Saving (writing) a program or combination

In addition to the parameters mentioned in the preceding pages, such as the changes you make when using the
realtime control knobs to modify the sound, arpeggio pattern, and tempo etc., the microSTATION has many more
parameters, all of which can be saved. (However, some of the parameters adjusted in realtime control B mode are
not saved. Nor are the realtime control A mode changes saved for a combination.)
Be aware that the changes you make by editing will be lost when you select another program or combination, or
when you turn off the power. We recommend that you save your program or combination when you've come up
with a sound that you like.
In the following example, we'll explain how to save a program in Program mode.
1.
Use the realtime controls to modify (edit) a program.
(p. 14 "Using controllers to modify the sound")
2.
Press the  button to enter PROG EDIT.
The PROG EDIT screen OSC Common will appear first.
3.
Use  buttons to select "Write Program."
4.
Press the  button.
The program name page will appear.
5.
If you want to edit the program name, press the  button.
The program name edit page will appear.
6.
Use the  buttons to move between character positions, and use the  buttons to specify the character
at each position.
When you've finished editing the name, use the  button to return to the first program name page (the screen
shown in step 4).
7.
Press the  button.
A page allowing you to specify the category will appear.
If you want to change the category, press the  button.
Use the  buttons to specify the desired category.
When you've changed the category, use the  button to return to the
first category page.
16