Product Description - Kemper MaxiFil Clean Mode D'emploi

3 Product description

MaxiFil Clean is a compact device for welding fume filtration, the use of which
extracts and separates (99.9% efficiency) welding fumes, generated during the
welding process, close to the place of origination. For this purpose, the device is
equipped with a flexible extraction arm whose extraction nozzle is flexible and fixed in
each position in a suspended state. The exhausted air is cleaned through two-stage
filtration (inserted rotating separator and filtration cartridge) and conveyed back into
the work area. Particles separated by the filtration cartridge are cleaned by
automatically activated compressed air impulses and together with the particles
separated via the inserted rotating separator are collected with the automatic
extraction system within the container for disposal.
Pos.
1
2 Exhaust arm / load-carrying
3
4
5
6
KEMPER MaxiFil Clean Instruction manual - EN
Designation
Exhaust nozzle
structure
Grip handle
Filtration unit
Cable holder
Rear wheel
Technical changes and errors reserved.
Pos.
7
8
9 Compressed air connection
10
11
12
- 46 –
Designation
Control wheel with brake
Dust collection tank
Power cable
Exhaust hole
Control panel