Kemper MaxiFil Clean Mode D'emploi page 64

• Plug the opening after the dust collection tank (pos. 2) with the yellow closing
cap (pos. 1).
• Remove the yellow closing cap from the opening of the new dust collection
tank and plug it into the opening on the back side of the MaxiFil Clean unit.
• Place the new dust collection cartridge in reversed order on the mount of the
MaxiFil Clean, in doing so the cartridge (Pos. 2) should be turned around while
inserted on the filling port, so that the seal (Pos. 1) tightens the filling port
equally.
• Press On/Off to restart the MaxiFil Clean unit.
Note
The order number for the replacement dust collection tank (4 piece
set) is 119 0688.
Until their final disposal, the dust collection tanks shall be stored
vertically with the yellow closing cap facing upward.
KEMPER MaxiFil Clean Instruction manual - EN
- 64 –
Technical changes and errors reserved.