Kemper MaxiFil Clean Mode D'emploi page 62

Replacing the dust collection tank:
The dust collection tank status is continuously inspected and the indicator lamp
flashes five times when the defined level is exceeded and MaxiFil Clean is switched
off in the process.
Note
Determine how a full dust collection tank containing dust from welding
will be professionally disposed of with the relevant regional institution in
advance.
CAUTION
Emptying the dust collection tank is prohibited. This would
contaminate the surrounding area with dust.
Only use genuine dust collection tanks, for only those guarantee
the professional storage of collected dust.
Skin contact with smoke originating from cutting, etc. may result
in irritation in sensitive individuals.
Risk of severe damage to the respiratory organs and respiratory
system.
• On the back of Maxifil Clean, there is the dust collection tank (pos 2) and
yellow closing cap (pos. 1).
KEMPER MaxiFil Clean Instruction manual - EN
- 62 –
Technical changes and errors reserved.