Transporting The Appliance; Securing The Appliance Against Frost - Gaggenau DF250 Notice D'utilisation

Transporting the appliance

Empty the dishwasher and secure loose parts.
Drain the appliance according to the following steps:
1.
Turn on the tap.
2.
Open the door.
3. Switch on ON/OFF button (.
4.
Select wash cycle with the highest temperature.
The estimated wash cycle duration is indicated on
the digital display @.
Press START button )".
5.
6.
Close the door.
Wash cycle sequence starts.
7.
Open the door after approx. 4 minutes.
8. Press START button )" until "Program was
terminated"/"Ready in one minute." is indicated at
the digital display @.
9.
Close the door.
10.
Open the door after approx. 1 minute.
The digital display @ indicates; "Finished".
11. Switch off ON/OFF switch (.
12.
Turn off the tap, disconnect supply hose and drain
water.
Note: Transport appliance upright only. This prevents
residual water from running into the machine control
and damaging the wash cycle sequence.
Installation and connection

Securing the appliance against frost

If the appliance is in a room where there is a risk of frost
(e.g. holiday home), empty the appliance completely
(see "Transporting the appliance").
en-us
51