Cleaning And Care; Faults And Repairs; After-Sales Service - CONSTRUCTA CO260053 Notice D'utilisation

Cleaning and care

:
Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Caution!
Surface damage due to incorrect cleaning: Do not use any
harsh or abrasive cleaning agents
■
cleaning agents that contain alcohol
■
abrasive cleaning aids such as steel wool or scourers.
■
Observe the specifications in the tables.

Faults and repairs

It is not always necessary to call the after-sales service.
Sometimes, you can find a remedy yourself. However, bear in
mind the following instructions.
:
Risk of electric shock!
Work on the appliance electronics may only be performed by
■
a specialist.
Always disconnect the appliance from the power supply
■
when work is carried out on the electronics. Switch off the
circuit breaker or remove the fuse from your household fuse
box.
Problem
If the hobs cannot be switched on:
Check whether there is a power cut.
■
Check in the fuse box to make sure that the circuit-breaker
■
for the appliance is OK.

After-sales service

In the event of faults and repairs that you cannot rectify yourself,
please use our after-sales service.
You can find the addresses in the after-sales service directory.
Note: You will be charged for calling the after-sales service
regarding an operating error.
For after-sales service cases, please specify the appliance
name: CO260053.
Additional information on products, accessories, replacement
P roduktinf o
parts and services can be found at www.constructa.de and in
the online shop www.constructa-eshop.com
Caution!
Do not use stainless steel cleaners that can damage the
lettering.
Wipe the built-in control box with a soft, damp cloth. If it is very
dirty, add a few drops of cleaning agent to the water used for
cleaning. Wipe with a dry cloth afterwards.
Your hob comes with its own instructions for use. They contain
information on care and cleaning.
13