Storing Speed Dial Numbers; Calling Up Speed Dial Numbers - switel T10 clip Mode D'emploi

4.7

Storing speed dial numbers

Your telephone allows you to store 10 numbers for speed
dialling. The numbers 0 to 9 on the number pad are used as
memory locations.
1. Lift the receiver.
2. Press the S button and the display will show
SAVE ?.
3. Press the S button again. The cursor will flash
and the display will show MEMORY.
4. Press the required memory location between 0
and 9 on the number pad.
S
If the memory location is already occupied, the
display will show the message OVERWRITE ?.
S
If you want to overwrite the memory location,
press the S button again.
S
If you do not want to overwrite the memory
location, press the disconnect button once and
repeat the entire process.
5. Now enter the required telephone number with a
maximum of 22 digits.
6. Save with the S button. The display will show
SAVED !!.
4.8

Calling up speed dial numbers

To call a saved speed dial number, proceed as follows:
1. Lift the receiver.
2. Press the e button and the required storage
location between 0 and 9. The saved telephone
number will be dialled directly.
54
− Operation −