Using The Accessories - Dirt Devil VAPORFLEX M3101 Mode D'emploi

2 Unpacking and connecting
2
5
3
4
1

2.3 Using the accessories

2
1
26
4. Push
connection(Fig. 4/1) onto the lower end of the extension
tube (Fig. 4/2).
1
Fig. 4
5. Push the accessories mount (Fig. 5/1) onto one of the
extension tubes (Fig. 5/2). Then push both round brush-
es (Fig. 5/3-4) and the jet nozzle (Fig. 5/5) on to the ac-
cessories mount.
Your steam cleaner is now ready to use.
2
Fig. 5
Together with the floor nozzle just installed, you can ex-
pand the range of functions of your steam cleaner with oth-
er nozzles. If necessary, you can also vary the number of
extension tubes used.
The following accessories are included in the scope of de-
livery:
- Jet nozzle (Fig. 1/4)
Use this to clean hard-to-reach places.
- Nylon brush (Fig. 1/5)
Use this to intensively clean sensitive surfaces and to
clean stubborn dirt marks on carpets.
- Brass brush (Fig. 1/6)
Use this to intensively clean non-sensitive, and
scratch resistant surfaces.
- Window wiper (Fig. 1/28)
Use this like a wiper (from above to below) for clean-
ing glass and other smooth surfaces.
- Cleaning cloth (Fig. 6)
Use the cleaning cloth together with the floor nozzle
2
to clean smooth surfaces. Secure the cleaning coth
(Fig. 6/1) to the floor nozzle using the clamps
(Fig. 6/2).
Fig. 6
the floor nozzle with the jointed