MACHINE SPECIFICATIONS
Model
Working Voltage
Drive Speed
Vacuum Motor
Vacuum System Capacity
Solution Tank Capacity
Solution Flow (min/max)
Recovery Tank Capacity
Squeegee
Squeegee Width
Cleaning Width
Brush/Pad Motor
Brush/Pad Diameter
Brush/Pad Rotation Speed
Brush/Pad On-Floor Pressure (with Full Tank)
Central Wheels on Fixed Axle Diameter
Pivoting Wheel (diameter)
Wheel Pressure on the Ground
Maximum Floor Inclination
Machine Length
Machine Width (without Squeegee)
Machine Height
Machine weight with broom and full solution tank
(working condition)
Sound Pressure Level (at the Operator's Position)
GROUNDING INSTRUCTIONS
This machine is equipped with a grounding system. If the machine has a malfunction or an electrical failure, the grounding
system reduces the risk of electric shock. This Machine is equipped with a power supply cable with grounding cable and plug
with grounding connection.
The plug must be inserted in proper electrical mains equipped with a grounding system according to the Law in force.
WARNING:
Improper connections can cause electric shock. Ask a technician to check if the electrical plug to be used is
equipped with a grounding connection.
Do not modify the plug of the machine. If it is not possible to connect the plug of the machine to the electrical
mains, have a qualified technician install a proper electrical mains equipped with a grounding system, according
to the Law in force.
Extension
Use the extension supplied with the machine or an extension of identical electrical characteristics.
Operator's Manual - Vantage 17 Cable
Vantage 17 Cable 115 V
115 V
Determined by brush rotation
550 W, 60 Hz
51.8 in H
O (1,316 mm H
2
8.2 gal (31 liters)
0.08/0.26 gal/min (0.3/1.0 liters/min)
7.7 gal (29 liters)
Straight
28.3 in (720 mm)
17 in (430 mm)
550 W, 60 Hz
17 in (430 mm)
170 rpm
61.6 lbs (28 kg)
9.8 in (250 mm)
1.9 in (49 mm)
Less than 0.5 N/mm
43.9 in (1,115 mm)
22.4 in (570 mm)
41.4 in (1,050 mm)
217.2 lbs (98.5 kg)
76 dB(A)
ENGLISH
Vantage 17 Cable 230 V
230 V
550 W, 50 Hz
O)
2
1,100 W, 50 Hz
150 rpm
2
2 %
EN
7