ANSMANN Racing xMove 2.0 Station Mode D'emploi page 9

5.3.2 According to press "Dec </> Inc" key you can inquire the individual
voltage of each battery and final voltage etc. continually as follows
(this needs to connect the balance plug)
Intelligent Digital Balance Charger xMove 2.0 Station
You can check the individual voltages of each cell in the battery pack
while using the individual connection cable to the battery.
The final voltage will be reached at the end of process.
You can inquire the safety capacity.
You can inquire the safety time.
You can use the 3-pin port as an USB port or inquire the safety
temperature value.
lt shows you the external temperature when the temperature sensor
is connected.
This screen shows the present voltage of the input power.
9