Burkert 0450 Instructions De Service page 10

T D
ECHNICAL ATA
Valve construction
• 5/2 or 5/3-way valve with 3/2-way pilot valve Type 6106 (standard and impulse versions)
• 5/2-impulse or 5/3-way valves have double width and occupy 2 valve spaces
• Valve housing aluminium, black anodized, piston slide valve, service connections
• Service connections 2 (B) / 4 (A), supply and vent connection 1 (P) / 3 (R) / 5 (S) with interior thread G 1/8 G 1/8
• The valve can be assembled to a valve block on Aluminium Baseplate Type MP05
• Any orientation, but preferably with magnet system above
• Manual override knob for manual operating of the valve
Circuit functions of valves Type 0450
H 5/2-way valve:
pilot control, de-energized, output port 2 exhausted,
various reset modes including impulse valve
L 5/3-way valve:
pilot control, in middle position all connections blocked
N 5/3-way valve:
pilot control, in middle position outputs ports 2 and 4
exhausted
NOTE By sealing a service connection, the 5/2-way valve may be simply converted into a 3/2-way valve:
Service connection 2
Service connection 4
Media
• Compressed air, lubricated, unlubricated
• Sealing material
• Permissible temperature range
Medium
Ambient
• Operating pressure range
ATTENTION!
Observe the permissible pressure range on the nameplate!
Pressure difference between connections 1 and 3 ≥ ≥ ≥ ≥ ≥ 2 bar
At temperatures below 0 °C, operation is limited to dried air.
8 - 8640-0450
=> Circuit function C
=> Circuit function D
POM/NBR
- 10 to + 70 °C
- 10 to + 55 °C
2 - 8 bar or 2 - 10 bar
Example
permissible pressure