Installation And Operation; Safety Instructions - Bartscher 190.160 Mode D'emploi

A c c e s s o r i e s
• • • •
For model: Mini (190.160):
1 strainer for 2 cups + 1 single-cup strainer + 1/2 meter hose from artificial materials
and one membrane-cleaning device.
• • • •
For models: 2-, 3- and 4- group (190.161, 190.162, 190.163, 190.164):
2 strainers for 2 cups (2-group device);
3 strainers for 2 cups (3-group device);
4 strainers for 2 cups (4-group device);
+ 1 single-cup strainer;
+ 1 ½-meter hose from artificial materials;
+ 1 membrane-cleaning device.

5. Installation and operation

5.1 Safety instructions

WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with
protective contact.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
•
See that the cable does not touch any heat sources or sharp edges. Do not let the
cable dangle over the counter edge.
WARNING! Hot external surface!
During operation some parts of the device become very hot. In order to avoid
injuries do not touch any hot parts!
•
Do not use the device if it does not function properly, has been damaged or dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not insert any objects into openings in the device.
•
Do not touch the device with bare and/or wet hands.
- 31 -