Possible Malfunctions - Bartscher 190.160 Mode D'emploi

7. Possible Malfunctions

The following problems with functioning are the result of calcium deposits:
Coffee is not at the right temperature:
o
- Heat outflow channels are blocked by deposits.
Water is not flowing from all brewing assemblies:
o
- Deposits are blocking the flow of water.
ATTENTION!
To prevent malfunctioning of the device due to the formation of calcium deposits,
with water hardness greater than 6° the device must be connected to a water
softener unit.
Problems with grinding:
Coffee comes out too fast:
o
- Change grinding settings, as at present they are too coarse.
Coffee comes out too slowly:
o
- Change grinding settings, as at present they are too fine.
If any other problems occur with the functioning of the device, contact a Customer
Service Centre.
Alarm signals on the service panel
- Contact a
A l a r m
Flowmeter
Vol.Gr.X
Alarm - Check the flow of
Time-out
Boiler
- Contact a
refilling
- 42 -
Customer Service
Centre
water to the device
Customer Service
Centre
- Contact a Customer
Service
- Contact a Customer
999999999
- Decalcify the coffee
Change filter
999999999
- To turn off a display
Service Centre
Service Centre for
maintenance service
maker.
warning, turn the device
off via the main on/off
switch (see (8) fig. 1).
Simultaneously hold the
„2 x espresso" and
„2 x coffee" buttons and
turn the device off.