Delivery Check; Packaging; Transport, Packaging And Storage - Bartscher 190.160 Mode D'emploi

3. Transport, packaging and storage

3.1 Delivery check

Please check the delivery for completeness and transport damage immediately after
receipt.
In case of visible damage, do not accept or accept the delivery with reservation only.
Note the extent of damage on the carrier's bill of delivery and notify us of any recorded
damage.
Hidden damages should be reclaimed immediately after detection, as claims for
damages can only be asserted within the effective period for complaints.

3.2 Packaging

Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
Observe the regulations applicable in your country when disposing of the
packaging. Supply re-usable packing materials to the recycling centre.
Please inspect the device for completeness. In case any part is missing, please contact
our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the positioning-
and storage markings indicated on the outside.
Packages should be stored under consideration of the following:
Do not store outdoors.
-
Keep it dry and dust-free.
-
Do not expose it to aggressive media.
-
- Do not expose it to direct sunlight.
Avoid mechanical shocks and vibrations.
-
In case of longer storage (> 3 months), make sure you check the state of the
-
packaging and the parts regularly. If required, refresh or renew.
- 28 -