Do You Want To Change The Dhw Time Program - Siemens Synco 700 Mode D'emploi

Do you want to change the DHW time program?

(Only with RMH760)
Time program of DHW heating
Similar to space heating, the DHW is heated according
to a certain time schedule. The change between normal
and reduced temperature takes place automatically.
You can adopt the factory-set time program, but here too,
individual settings can be made.
The DHW time program can be changed the same way
as the space heating program:
From the DHW time switch submenu, select the weekday,
then the start time of the heating period, and then the
assigned setpoint.
Here too, it is possible to copy a 24-hour program to
other days.
18
Siemens Building Technologies / HVAC Products
Time program of the circulating pump
The same way – if you wish – you can change the time
program for activating the circulating pump.
Make the entries on submenu Circ pump time switch.
Here too, prerequisite is that your controller controls
DHW heating autonomously. In interconnected plant, the
time program can be predefined from an external loca-
tion.
Path: Main menu > DHW time switch
Path: Main menu > Circ pump time switch
CE1B3131x2-en 74 319 0346 0 a 19.11.2004