Do You Want To Change The Daily Switching Points Of The Time Switch - Siemens Synco 700 RMS705 Manuel D'utilisation

Do you want to change the daily switching points of the time switch?

General
In the time program of the time switches, of which a
maximum of 6 can be active, you can set the daily
switching times to suit your needs. A maximum of 6
switching points per day can be set.
In addition to the weekdays (Monday through Sunday),
you can enter a special day switching program.
The special day will be activated when making an entry
on the Holidays / Special day menu (
Changes on the RMS705 are possible only when the
program is defined by the unit's own time switch. If the
program is determined by some external controller,
changes can only be made from that controller.
Building Technologies / HVAC Products
page 14).
Welcome > Main menu > Time switch 1... > ...
Path:
Changing and canceling times
1. Select the required day by turning the OK knob and
confirm by pressing the knob.
2. Select the required point in time by turning the OK
knob and confirm by pressing the knob.
Pointer in the diagram supports you when
navigating.
3. Set the required time.
Canceling the point in time: Reset the time via 00:00
until ––:–– appears.
4. Readjust additional times, if required.
Entering additional switching points
1. Select the required day.
2. In the diagram, advance pointer
in time of the current program.
3. Turn the OK knob by one notch; ––:––
will appear.
4. Set the required start time.
CE1B3123x2-en
to the last point
––––––
74 319 0503 0 a
12
06.04.2006