You don't want to heat according to the heating program
Other room operating modes
If you do not want to heat according to the heating pro-
gram, select one of the following room operating modes
from menu option Preselection:
Comfort
Continuously heating to the
Comfort setpoint
Precomfort
Continuously heating to the
Precomfort setpoint
Economy
Continuously heating to the
Economy setpoint
Protection
No heating, unless there is a
risk of frost
Path:
If you only want to heat temporarily in one of the continuous operating modes,
12
Siemens Building Technologies / HVAC Products
Main menu > Heating circuit ... > Room operating mode > Preselection
don't forget to return to AUTO mode in due time.
CE1B3131x2-en
Setpoints
The setpoints assigned to the room operating modes use
the same symbols and designations.
Settings:
page 13.
Impact of continuous operation
In continuous operation, demand-dependent control of
the heating (automatic heating limit) and the holidays
and special days entered are inactive!
If your plant comprises 2 heating circuits, you can
choose the heating program for both heating circuits
separately (Path: ... > Heating circuit 2 >... ).
74 319 0346 0 a
19.11.2004