You Don't Want To Heat According To The Heating Program - Siemens Synco 700 RMH760B Mode D'emploi

You don't want to heat according to the heating program

Other room operating modes
If you do not want to heat according to the heating pro-
gram, select one of the following room operating modes
from menu option Preselection:
Comfort Continuously heating to the
Comfort setpoint
Precomfort Continuously heating to the
Precomfort setpoint
Economy Continuously heating to the
Economy setpoint
Protection No heating, unless there is
risk of frost
Path:
If you only want to heat temporarily in one of the continuous operating modes,
12
Building Technologies / HVAC Products
Main menu > Heating circuit ... > Room operating mode > Preselection
don't forget to return to AUTO mode in due time.
CE1B3133x2-en
Setpoints
The setpoints assigned to the room operating modes use
the same symbols and designations.
Settings: page 13.
Impact of continuous operation
In continuous operation, demand-dependent control of
the heating (automatic heating limit) and the holidays
and special days entered are inactive!
If your plant comprises several heating circuits, you can
select the heating program for every heating circuit
separately (e.g. path: ... > Heating circuit 2 >... ).
74 319 0560 0 a 10.10.2006