Hofmann geodyna 8250p Mode D'emploi page 28

4 1
A
B
28
2
3
4-8
4-9
Layout
Fig. 4-8 SETTINGS
Settings Screen.
Open with the SETTINGS key (7, Fig. 4-5).
Commands:
1 - HELP key - For selecting HELP texts.
2 - HOME key - Returns you to the starting page
(INTRO SCREEN).
3 - USER CAL key - Starts the USER CALIBRATION

procedure ( 6.2).
4 - ESC key -
- Returns you to the MAIN MENU.
Note: Directly press the items in the list to select the
desired options. To change parameters, manually turn
the wheel shaft. When the required value is reached,
press it to enter it and complete the selection.
Fig. 4-9 COUNTERS
Counters Screen.
Open with the SETTINGS key (7, Fig. 4-5) / Counters
(A, Fig. 4-9).
The screen pages for Counters and System Information
(B, Fig. 4-9), both accessible from the Setting Screen
Page, do not have parameter selection commands, but
instead they respectively show Statistical Information
and information about the machine System.
Counters Screen Page lists:
- Total Measuring Runs
- Measuring Runs with result OK
- Optimisation Cycles
- Assistance Service Runs
- Runs since last Calibration
- Wheel Clamping Cycles