Hofmann geodyna 8250p Mode D'emploi page 124

8
8
124
5-68
5-69
5-70
5-71
5-72
Operation
Figure 5-68 OPTIMISATION "2"
START is signalled on the screen.
 Perform the wheel measuring run.
A compensation run is performed.
The OPTIMISATION "3" screen appears (Fig. 5-69).
Figure 5-69 OPTIMISATION "3"
 Mount the tyre correctly on the rim (follow the
centring line) and inflate to specified inflation
pressure.
 Confirm by pressing key 8.
The OPTIMISATION "4" screen appears (Fig. 5-70).
Figure 5-70 OPTIMISATION "4"
(first measuring run with tyre)
 Clamp the wheel.
 Position the valve so that it is exactly perpendicular
to and above the chuck.
 Confirm the valve position by pressing key 8.
The OPTIMISATION "5" screen appears (Fig. 5-71).
Figure 5-71 OPTIMISATION "5"
START is signalled on the screen:
 Perform the wheel measuring run.
A measuring run is performed.
The OPTIMISATION "6" screen appears (Fig. 5-72).