CONSTRUCTA CD50030 Mode D'emploi Et Notice De Montage page 57

How to operate the extractor hood
The most effective method of removing
vapours produced during cooking is to:
❑ Switch the ventilator ON
as soon as you begin cooking.
❑ Switch the ventilator OFF
a few minutes after you have finished
cooking.
Switching the ventilator ON:
1. Pull out the vapour extractor tray.
❑ The ventilator is operating.
2. Select the required ventilator power level.
Operating controls on different models:
Switching the ventilator OFF:
❑ Push the vapour extractor tray back in
as far as it will go.
Note: The next time that the tray is pulled
out, the ventilator will start up at the power
level to which it was last set.
Level 1
Level 2
Level 1
Level 2
Level 3
Level 3
Level 1
Level 2
Light:
Note: The light can be switched on at any
time, including when the vapour extractor
tray has been pushed back into the hood.
OFF
ON
57