Service; Instruction On Changing Temperature; Procedure Of Restoring Default Settings - Hendi 232903 Mode D'emploi

8. SERVICE

In order to obtain technical assistance, please contact an authorized service and/or seller of the appliance and
provide the serial number and purchase date of the appliance.

9. INSTRUCTION ON CHANGING TEMPERATURE

• After the counter is connected to power supply,
the digital display shows current temperature in
the compartment.
• Press SET for over 1 second (however, no longer
than 3 seconds): the display shows the set-point
temperature.
• The temperature value can be changed up by

10. PROCEDURE OF RESTORING DEFAULT SETTINGS

In order to restore default settings:
• switch the controller off
• switch the power back on, simultaneously press-
ing SET and DOWN.
IMPORTANT: this action shall delete all changes
made to the parameter settings.
pressing and down by pressing
• After the required value is set, confi rm the
change by pressing
• Defrosting shall activate automatically. However,
if required, it can be turned on by pressing
for min. 5 seconds.
NOTE:
All products were precisely configured before
shipment from the manufacturing plant. The user
is not allowed to change parameters of the mi-
crocomputer controller on their own to prevent
damage to the compressor or other malfunctions.
.
.
7
EN