Controller Specifications - Agilent Technologies 929-0196 Mode D'emploi

CONTROLLER SPECIFICATIONS

Operation All type and size of
VacIon pump
Input:
- Voltage 24 Vdc ±4 Vdc
- Power 60 W
- Fuse 2 x T 3.15 A
Output:
- Voltage ±5000 Vdc ±10% (refer to
the following figure) (polarity
through internal card)
- Current 15 mA (short circuit) (refer to
the following figure)
- Power 21 W
Dual Current
Recorder
Output:
- Rec Out1 0 to 10 Vdc (10 V correspond
to 10 mA);
resolution of 10 mV minimum
(corresponding to 10 µA)
Available on front panel BNC
connector and at pins 1 and 6
of rear panel Accessory
connector.
- Rec Out2 0 to 10 Vdc (10 V correspond
to 1 mA);
resolution of 10 mV
minimum (corresponding
to 1 µA)
Available at pins 2 and 6 of
rear panel Accessory
connector.
Voltage
Recorder
Output:
- Rec Out
Operating
temperature
Storage
temperature
Radio interference
suppression
Safety
Installation category
Pollution degree
Output connector:
- High voltage
- Accessory
Weight
19/24
TECHNICAL INFORMATION
0 to 5 V (corresponding to
0 to 5 kV with 1 V
corresponding to 1 kV in
linear mode)
Available at pins 4 and 8 of
rear panel Accessory
connector.
0 °C to 45 °C
-20 °C to +70 °C
EN 55011 class A Group 1
EN 61000-4-2
EN 61000-4-4
EN 61000-4-3
EN 61010-1
II
2
FISCHER type:
part number 105 A049
for model 929-0196
KINGS type:
part number 1064-1
for model 929-0197
J 001 input/output
signal (9-pin "D" type socket)
1.3 Kg 2.86 lbs
87-900-053-01 (F)