Rotex RKRTR Manuel D'installation page 37

Keep the front clear at all times for access.
1 Drill holes in the wall taking the dimensions of the receiver
into account and insert the supplied plugs in the holes.
Refer to figure 5.
2 Fasten the receiver with the supplied screws.
3 Unscrew both screws and remove the front cover.
4 Unscrew both screws of the lower right cable bracket and
remove the bracket.
RKRTR + EKRTETS
Room thermostat
4PW50084-1
3
4
4
3
Installation manual
9