Installation Of The Receiver - Rotex RKRTR Manuel D'installation

3.3.

Installation of the receiver

Typically the receiver needs to be installed next to the Rotex
indoor unit.
Recommendations
reception
Take the installation suggestions for the receiver into account
when selecting the installation location and follow the
recommendations below.
Do not install the receiver inside a metal box.
Mount the receiver vertically, and minimum 10 cm away
from the Rotex indoor unit.
Mount the receiver minimum 10 cm away from any vertical
metal pipe or vertical electric circuit.
Mount the receiver at least 1.5 m above the ground.
Before obtaining access to terminals, all power
supply circuits must be interrupted.
Installation manual
8
for an optimum
RKRTR + EKRTETS
Room thermostat
signal
4PW50084-1