Feeding In Laundry - Miele professional PRI318 Mode D'emploi

en - Using the ironer
Exiting favourites
Tap the  button to exit a favourite setting.

The set ironing temperature and roller speed set previously are loaded.

Feeding in laundry

Press the  button to start the ironing process.

The heater plate engages and the roller begins to rotate.
 Risk of damage as a result of incorrect laundry in-feed.
If laundry items with buttons are incorrectly fed into the ironer, they may be damaged or
torn off when the item is passed into the heater plate.
Laundry with buttons must be inserted into the ironer so that the buttons are facing the
roller and can be pressed into the roller's ironing cloth during ironing.
Place a cloth over zips, metal buttons and metal hooks before ironing to protect the
heater plate.
Never iron metal or plastic clasps of any kind, or very bulky buttons (e.g. ball-shaped
buttons).
Align the laundry item parallel to the roller on the laundry infeed table.

Smooth the item of laundry.

Feed the item of laundry evenly into the ironer.

Do not feed small items of laundry into the ironer on only one side.
If laundry in-feed is on just one side, the heat will only be used on one side and the load
only exerted on the roller padding on one side. If the laundry in-feed continues to be on
one side only, this will be indicated by an audible signal and the red  symbol or
 symbol appearing in the display.
Use the entire roller width wherever possible and distribute small items of laundry evenly
on the laundry in-feed table.
38