Functionality; Initial Use; Assembling The Fairy Lights - LIVARNO LUX 10609A Instructions D'utilisation Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
rechargeable batteries into
fire or water.
Expired or drained rechargea-
ble batteries may leak chemi-
cals which will damage the
product. Therefore remove the
rechargeable battery if the fairy
lights will not be used for ex-
tended periods.
rechargeable batteries could
cause chemical burns on con-
tact with the skin; you should
therefore wear suitable protec-
tive gloves at all times if such
an event occurs.
Only use rechargeable batter-
ies of the correct size and and
the recommended type (see
section "Technical data").
Ensure correct polarity, indicated
in the battery compartment.

Functionality

The solar cell built into the product
converts sunlight into electricity and
stores it in a Ni-MH rechargeable
22 GB/IE
CAUTION! EX-
PLOSION HAZ-
ARD! Never throw
WEAR PROTEC-
TIVE GLOVES!
Leaked or damaged
battery. The light switches on at dusk.
The built-in LED is an energy-saving
illuminant with a very long life. The
light duration depends on the amount
of sunlight, the angle at which light
hits the solar panel, and the temper-
ature (the battery capacity varies
by temperature). A vertical angle
of light at temperatures above the
freezing point is ideal. The recharge-
able battery will only achieve its
maximum capacity after several
charging and discharging cycles.

Initial use

Before first use, remove the
protective film from the solar
panel.
Assembling the
fairy lights
Push the ground spike
the upright tube
tach the cover
tube
(see Fig. A).
4
Insert the fairy lights
1
fully into the fastening clip
with the illuminant facing
down (see Fig. B).
into
3
. Then at-
4
to the upright
5
care-
11
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10609b

Table des Matières