Stop; Oven Function With Pre-Heat - ETNA ECM280ZT Mode D'emploi

OPERATING INSTRUCTIONS

Stop

Oven function with pre-heat

You can stop or cancel a running programme by opening the door
or pressing the stop button. In order to start the programme again,
press the start button.
• If you want to cancel the programme entirely, press the stop
button again.
The current time appears in the display.
You can prepare dishes in the oven in the same way as in a
traditional oven. The microwave is not used. You are advised to
pre-heat the oven to the required temperature before placing food
in the oven.
1. Press once on the oven button.
'140 °C' flashes in the display.
• Again press a number of times on the oven button if you
wish to set another temperature. The first temperature that
appears in the display is '140. You can set a temperature
from 140 °C to 230 °C.
• You can use the control dial to select temperature by turning
the dial.
2. Press the start button.
The selected temperature is now confirmed.
3. Press the start button again to start the pre-heat.
• A double-beep signal indicates when the oven is at
temperature. The set temperature appears in the display.
4. Place the dish in the microwave.
5. Turn the control dial to set the time (maximum
95 minutes).
The display indicates the set time.
• The time can only be set once the pre-heat is ready and the
door has been opened and closed again.
• If no time is set within 5 minutes after pre-heating, the pre-
heating stops and
5 beeps sound. The microwave switches off.
6. Press the start button again.
The microwave switches on and the set time counts down in
the display. The oven symbol flashes in the display.
• When the set time has been reached, the current time
appears again in the display, and you will hear 5 beeps.
EN 11